- NAME
- place - Geometry manager for fixed or rubber-sheet placement
- SYNOPSIS
- place window option value ?option value ...?
- place configure window option value ?option value ...?
- place forget window
- place info window
- place slaves window
- DESCRIPTION
- -in master
- -x location
- -relx location
- -y location
- -rely location
- -anchor where
- -width size
- -relwidth size
- -height size
- -relheight size
- -bordermode mode
- FINE POINTS
- KEYWORDS
place - Geometry manager for fixed or rubber-sheet placement
place window option value ?option value ...?
place configure window option value ?option value ...?
place forget window
place info window
place slaves window
The placer is a geometry manager for Tk.
It provides simple fixed placement of windows, where you specify
the exact size and location of one window, called the slave,
within another window, called the master.
The placer also provides rubber-sheet placement, where you specify the
size and location of the slave in terms of the dimensions of
the master, so that the slave changes size and location
in response to changes in the size of the master.
Lastly, the placer allows you to mix these styles of placement so
that, for example, the slave has a fixed width and height but is
centered inside the master.
If the first argument to the place command is a window path
name or configure then the command arranges for the placer
to manage the geometry of a slave whose path name is window.
The remaining arguments consist of one or more option-value
pairs that specify the way in which window's
geometry is managed.
If the placer is already managing window, then the
option-value pairs modify the configuration for window.
In this form the place command returns an empty string as result.
The following option-value pairs are supported:
- -in master
-
Master specifes the path name of the window relative
to which window is to be placed.
Master must either be window's parent or a descendant
of window's parent.
In addition, master and window must both be descendants
of the same top-level window.
These restrictions are necessary to guarantee
that window is visible whenever master is visible.
If this option isn't specified then the master defaults to
window's parent.
- -x location
-
Location specifies the x-coordinate within the master window
of the anchor point for window.
The location is specified in screen units (i.e. any of the forms
accepted by Tk_GetPixels) and need not lie within the bounds
of the master window.
- -relx location
-
Location specifies the x-coordinate within the master window
of the anchor point for window.
In this case the location is specified in a relative fashion
as a floating-point number: 0.0 corresponds to the left edge
of the master and 1.0 corresponds to the right edge of the master.
Location need not be in the range 0.0-1.0.
If both -x and -relx are specified for a slave
then their values are summed. For example, -relx 0.5 -x -2
positions the left edge of the slave 2 pixels to the left of the
center of its master.
- -y location
-
Location specifies the y-coordinate within the master window
of the anchor point for window.
The location is specified in screen units (i.e. any of the forms
accepted by Tk_GetPixels) and need not lie within the bounds
of the master window.
- -rely location
-
Location specifies the y-coordinate within the master window
of the anchor point for window.
In this case the value is specified in a relative fashion
as a floating-point number: 0.0 corresponds to the top edge
of the master and 1.0 corresponds to the bottom edge of the master.
Location need not be in the range 0.0-1.0.
If both -y and -rely are specified for a slave
then their values are summed. For example, -rely 0.5 -x 3
positions the top edge of the slave 3 pixels below the
center of its master.
- -anchor where
-
Where specifies which point of window is to be positioned
at the (x,y) location selected by the -x, -y,
-relx, and -rely options.
The anchor point is in terms of the outer area of window
including its border, if any.
Thus if where is se then the lower-right corner of
window's border will appear at the given (x,y) location
in the master.
The anchor position defaults to nw.
- -width size
-
Size specifies the width for window in screen units
(i.e. any of the forms accepted by Tk_GetPixels).
The width will be the outer width of window including its
border, if any.
If size is an empty string, or if no -width
or -relwidth option is specified, then the width requested
internally by the window will be used.
- -relwidth size
-
Size specifies the width for window.
In this case the width is specified as a floating-point number
relative to the width of the master: 0.5 means window will
be half as wide as the master, 1.0 means window will have
the same width as the master, and so on.
If both -width and -relwidth are specified for a slave,
their values are summed. For example, -relwidth 1.0 -width 5
makes the slave 5 pixels wider than the master.
- -height size
-
Size specifies the height for window in screen units
(i.e. any of the forms accepted by Tk_GetPixels).
The height will be the outer dimension of window including its
border, if any.
If size is an empty string, or if no -height or
-relheight option is specified, then the height requested
internally by the window will be used.
- -relheight size
-
Size specifies the height for window.
In this case the height is specified as a floating-point number
relative to the height of the master: 0.5 means window will
be half as high as the master, 1.0 means window will have
the same height as the master, and so on.
If both -height and -relheight are specified for a slave,
their values are summed. For example, -relheight 1.0 -height -2
makes the slave 2 pixels shorter than the master.
- -bordermode mode
-
Mode determines the degree to which borders within the
master are used in determining the placement of the slave.
The default and most common value is inside.
In this case the placer considers the area of the master to
be the innermost area of the master, inside any border:
an option of -x 0 corresponds to an x-coordinate just
inside the border and an option of -relwidth 1.0
means window will fill the area inside the master's
border.
If mode is outside then the placer considers
the area of the master to include its border;
this mode is typically used when placing window
outside its master, as with the options -x 0 -y 0 -anchor ne.
Lastly, mode may be specified as ignore, in which
case borders are ignored: the area of the master is considered
to be its official X area, which includes any internal border but
no external border. A bordermode of ignore is probably
not very useful.
If the same value is specified separately with
two different options, such as -x and -relx, then
the most recent option is used and the older one is ignored.
The place slaves command returns a list of all the slave
windows for which window is the master.
If there are no slaves for window then an empty string is
returned.
The place forget command causes the placer to stop managing
the geometry of window. As a side effect of this command
window will be unmapped so that it doesn't appear on the
screen.
If window isn't currently managed by the placer then the
command has no effect.
Place forget returns an empty string as result.
The place info command returns a list giving the current
configuration of window.
The list consists of option-value pairs in exactly the
same form as might be specified to the place configure
command.
If the configuration of a window has been retrieved with
place info, that configuration can be restored later by
first using place forget to erase any existing information
for the window and then invoking place configure with
the saved information.
It is not necessary for the master window to be the parent
of the slave window.
This feature is useful in at least two situations.
First, for complex window layouts it means you can create a
hierarchy of subwindows whose only purpose
is to assist in the layout of the parent.
The ``real children'' of the parent (i.e. the windows that
are significant for the application's user interface) can be
children of the parent yet be placed inside the windows
of the geometry-management hierarchy.
This means that the path names of the ``real children''
don't reflect the geometry-management hierarchy and users
can specify options for the real children
without being aware of the structure of the geometry-management
hierarchy.
A second reason for having a master different than the slave's
parent is to tie two siblings together.
For example, the placer can be used to force a window always to
be positioned centered just below one of its
siblings by specifying the configuration
-in sibling -relx 0.5 -rely 1.0 -anchor n -bordermode outside
Whenever the sibling is repositioned in the future, the slave
will be repositioned as well.
Unlike many other geometry managers (such as the packer)
the placer does not make any attempt to manipulate the geometry of
the master windows or the parents of slave windows (i.e. it doesn't
set their requested sizes).
To control the sizes of these windows, make them windows like
frames and canvases that provide configuration options for this purpose.
geometry manager, height, location, master, place, rubber sheet, slave, width
Copyright © 1992 The Regents of the University of California.
Copyright © 1994-1996 Sun Microsystems, Inc.
Copyright © 1995-1997 Roger E. Critchlow Jr.