Добавлена схема и полата стабилизатора на 5в и 12в

.gitignore

@@ -1 +1,2 @@
 amplifier-control-panel/amplifier-control-panel-backups/*
+power-unit-5v/power-unit-5v-backups/*

control-panel-for-for-dac/control-panel-for-for-dac.ino

@@ -3,16 +3,17 @@
 // https://alexgyver.ru/lessons/
 // https://www.hackster.io/mircemk/diy-arduino-vfd-display-20x2-vu-volume-unit-meter-37898f
 
-#define GAIN 1 // усиление 0...50
+#define GAIN 5 // усиление 0...50
-#define STEP 1  // плавность полос 0...20
+#define STEP 20  // плавность полос 0...20
 #define RL 1    // RL - горизонт, вертикаль 0...1
 // Выходы для управления реле (вкл.вкл  ЦАП/Блютуз)
-#define RELAY_POWER_USB 6
+#define RELAY_POWER_USB 7
-#define RELAY_POWER_BT 7
+#define RELAY_POWER_BT 6
 #define RELAY_POWER_MP3 10
-#define RELAY_OUT_USB 8
+#define RELAY_OUT_BT_LEFT 8
-#define RELAY_OUT_BT 9
+#define RELAY_OUT_BT_RIGHT 9
-#define RELAY_OUT_MP3 11
+#define RELAY_OUT_MP3_LEFT 11
+#define RELAY_OUT_MP3_RIGHT 12
 
 // Кнопки
 #define BTN_MENU 2       // Кнопка меню
@@ -62,9 +63,10 @@ void setup() {
   pinMode(RELAY_POWER_USB, OUTPUT);
   pinMode(RELAY_POWER_BT, OUTPUT);
   pinMode(RELAY_POWER_MP3, OUTPUT);
-  pinMode(RELAY_OUT_USB, OUTPUT);
+  pinMode(RELAY_OUT_BT_LEFT, OUTPUT);
-  pinMode(RELAY_OUT_BT, OUTPUT);
+  pinMode(RELAY_OUT_BT_RIGHT, OUTPUT);
-  pinMode(RELAY_OUT_MP3, OUTPUT);
+  pinMode(RELAY_OUT_MP3_LEFT, OUTPUT);
+  pinMode(RELAY_OUT_MP3_RIGHT, OUTPUT);
   
   //  lcdVuMeter.createChar(5,znak_l);
   //  lcdVuMeter.begin(16, 2);// lcdVuMeter 16X2
@@ -89,14 +91,36 @@ void setup() {
   }
   
   w = EEPROM.read(0);
+  if (usb) {
+    digitalWrite(RELAY_POWER_BT,HIGH);
+    digitalWrite(RELAY_POWER_MP3,HIGH);
+    digitalWrite(RELAY_POWER_USB,HIGH);
+    delay(500);
+    digitalWrite(RELAY_OUT_BT_LEFT,HIGH);
+    digitalWrite(RELAY_OUT_BT_RIGHT,HIGH);
+    digitalWrite(RELAY_OUT_MP3_LEFT,HIGH);
+    digitalWrite(RELAY_OUT_MP3_RIGHT,HIGH);
+  }
 
-  
+  if (bluetooth) {
+    digitalWrite(RELAY_POWER_USB,HIGH);
+    digitalWrite(RELAY_POWER_MP3,HIGH);
+    delay(500);
+    digitalWrite(RELAY_OUT_MP3_LEFT,HIGH);
+    digitalWrite(RELAY_OUT_MP3_RIGHT,HIGH);
+    delay(1000);
+    digitalWrite(RELAY_OUT_BT_LEFT,LOW);
+    digitalWrite(RELAY_OUT_BT_RIGHT,LOW);
+    digitalWrite(RELAY_POWER_BT,LOW);
+  }
+  if (mp3) {
+     }
   updateMenu();
 }
  
 void vu_metter() {
 
-  if(digitalRead(8)==LOW){w++;www=1;if(w>4){w=0;}delay(200);EEPROM.update(0,w);}
+//  if(digitalRead(8)==LOW){w++;www=1;if(w>4){w=0;}delay(200);EEPROM.update(0,w);}
  
   if(w==0&&www==1){www=0;
   byte a1[8] = {0b10101,0b10101,0b10101,0b10101,0b10101,0b10101,0b10101,0b10101};
@@ -168,7 +192,7 @@ i++;if(i<19){u_l0[i]=abs(ull);u_r0[i]=abs(urr);}else{i=1;}
 }
 
 String setUSBinput() {
-  return "USB input";
+  return "Input: USB";
 }
 
 
@@ -236,52 +260,54 @@ void actionUSB() {
 //  lcdService.clear();
   lcdService.setCursor(2,1);
   lcdService.print("On ");
-  digitalWrite(RELAY_POWER_BT,LOW);
+  digitalWrite(RELAY_POWER_BT,HIGH);
-  digitalWrite(RELAY_POWER_MP3,LOW);
+  digitalWrite(RELAY_POWER_MP3,HIGH);
-
-  digitalWrite(RELAY_OUT_BT,LOW);
-  digitalWrite(RELAY_OUT_MP3,LOW);
-  delay(1000);
-  digitalWrite(RELAY_OUT_USB,HIGH);  
   digitalWrite(RELAY_POWER_USB,HIGH);
+  delay(500);
+  digitalWrite(RELAY_OUT_BT_LEFT,HIGH);
+  digitalWrite(RELAY_OUT_BT_RIGHT,HIGH);
+  digitalWrite(RELAY_OUT_MP3_LEFT,HIGH);
+  digitalWrite(RELAY_OUT_MP3_RIGHT,HIGH);
   usb = true;
   bluetooth = false;
   mp3 = false;
 
-  delay(1500);
+//  delay(1500);
 }
 
 void actionBT() {
 //  lcdService.clear();
   lcdService.setCursor(2,1);
   lcdService.print("On ");
-  digitalWrite(RELAY_POWER_USB,LOW);
+  digitalWrite(RELAY_POWER_USB,HIGH);
-  digitalWrite(RELAY_POWER_MP3,LOW);
+  digitalWrite(RELAY_POWER_MP3,HIGH);
-
+  delay(500);
-  digitalWrite(RELAY_OUT_USB,LOW);
+  digitalWrite(RELAY_OUT_MP3_LEFT,HIGH);
-  digitalWrite(RELAY_OUT_MP3,LOW);
+  digitalWrite(RELAY_OUT_MP3_RIGHT,HIGH);
   delay(1000);
-  digitalWrite(RELAY_OUT_BT,HIGH);  
+  digitalWrite(RELAY_OUT_BT_LEFT,LOW);
-  digitalWrite(RELAY_POWER_BT,HIGH);
+  digitalWrite(RELAY_OUT_BT_RIGHT,LOW);
+  digitalWrite(RELAY_POWER_BT,LOW);
   usb = false;
   bluetooth = true;
   mp3 = false;
 
-  delay(1500);
+//  delay(1500);
 }
 
 void actionMP3() {
 //  lcdService.clear();
   lcdService.setCursor(2,1);
   lcdService.print("On ");
-  digitalWrite(RELAY_POWER_USB,LOW);
+  digitalWrite(RELAY_POWER_USB,HIGH);
-  digitalWrite(RELAY_POWER_BT,LOW);
+  digitalWrite(RELAY_POWER_BT,HIGH);
-
+  delay(500);
-  digitalWrite(RELAY_OUT_USB,LOW);
+  digitalWrite(RELAY_OUT_BT_LEFT,HIGH);
-  digitalWrite(RELAY_OUT_BT,LOW);
+  digitalWrite(RELAY_OUT_BT_RIGHT,HIGH);
   delay(1000);
-  digitalWrite(RELAY_OUT_MP3,HIGH);  
+  digitalWrite(RELAY_OUT_MP3_LEFT,LOW);  
-  digitalWrite(RELAY_POWER_MP3,HIGH);
+  digitalWrite(RELAY_OUT_MP3_RIGHT,LOW);
+  digitalWrite(RELAY_POWER_MP3,LOW);
   usb = false;
   bluetooth = false;
   mp3 = true;
@@ -299,12 +325,15 @@ void loop() {
       lcdService.print("USB DAC");
       lcdService.setCursor(0,1);
       lcdService.print(setUSBinput());
+//      actionUSB();
     }
     if(bluetooth){
       lcdService.print("Bluetooth");
+//      actionBT();
     }
     if(mp3){
       lcdService.print("MP3 module");
+//      actionMP3();
     }
   }
 //  bool btnMenuState = digitalRead(BTN_MENU);

power-unit-5v/fabrication-toolkit-options.json

@@ -0,0 +1 @@
+{"EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": false}

power-unit-5v/fp-info-cache

@@ -0,0 +1,64 @@
+15042311207390
+TerminalBlock
+TerminalBlock_Altech_AK300-2_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_Altech_AK300-3_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+3
+3
+TerminalBlock
+TerminalBlock_Altech_AK300-4_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+4
+4
+TerminalBlock
+TerminalBlock_Wuerth_691311400102_P7.62mm
+https://katalog.we-online.de/em/datasheet/6913114001xx.pdf
+Wuerth WR-TBL Series 3114 terminal block pitch 7.62mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_bornier-2_P5.08mm
+simple 2-pin terminal block, pitch 5.08mm, revamped version of bornier2
+terminal block bornier2
+0
+2
+2
+TerminalBlock
+TerminalBlock_bornier-3_P5.08mm
+simple 3-pin terminal block, pitch 5.08mm, revamped version of bornier3
+terminal block bornier3
+0
+3
+3
+TerminalBlock
+TerminalBlock_bornier-4_P5.08mm
+simple 4-pin terminal block, pitch 5.08mm, revamped version of bornier4
+terminal block bornier4
+0
+4
+4
+TerminalBlock
+TerminalBlock_bornier-5_P5.08mm
+simple 5-pin terminal block, pitch 5.08mm, revamped version of bornier5
+terminal block bornier5
+0
+5
+5
+TerminalBlock
+TerminalBlock_bornier-6_P5.08mm
+simple 6pin terminal block, pitch 5.08mm, revamped version of bornier6
+terminal block bornier6
+0
+6
+6

power-unit-5v/power-unit-5v.kicad_prl

@@ -0,0 +1,75 @@
+{
+  "board": {
+    "active_layer": 0,
+    "active_layer_preset": "All Layers",
+    "auto_track_width": true,
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36
+    ],
+    "visible_layers": "fffffff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "meta": {
+    "filename": "power-unit-5v.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

power-unit-5v/power-unit-5v.kicad_pro

@@ -0,0 +1,434 @@
+{
+  "board": {
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.09999999999999999,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.762,
+          "height": 1.524,
+          "width": 1.524
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 1.0
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.19999999999999998,
+        "min_via_annular_width": 0.049999999999999996,
+        "min_via_diameter": 0.39999999999999997,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [
+        0.0,
+        2.0
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
+    },
+    "layer_presets": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "power-unit-5v.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.25,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      }
+    ],
+    "meta": {
+      "version": 2
+    },
+    "net_colors": null
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_adjust_passive_values": false,
+    "spice_external_command": "spice \"%I\"",
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "2f047cea-5fa8-4df2-9928-5672cc3419d3",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}

power-unit-5v/production/netlist.ipc

@@ -0,0 +1,4 @@
+P  CODE 00
+P  UNITS CUST 0
+P  arrayDim   N
+999